Skip to product information
1 of 5

Flattening Stone

Flattening Stone

Regular price £28.00
Regular price Sale price £28.00
Sale Sold out
VAT included Delivery calculated at checkout.
  • Brings a worn, hollow whetstone back to flat
  • Grooved face clears the slurry as you work
  • Silicon carbide, as long as a standard whetstone

In stock ·Free UK delivery

Free UK delivery
2-year guarantee
30-day returns
Secure payment

Description

Whetstones wear hollow with use, and a hollow stone cannot give a straight edge. Rub this grooved stone across the surface to bring it flat again.

It is a coarse 320 grit block of silicon carbide, as long as a standard whetstone. The diagonal grooves carry the slurry away as you work. Use with water.

In the box: one flattening stone, 180 × 60 × 28 mm.

Good to know: for water stones, such as the two in our Whetstone Set. It flattens stones. It does not sharpen knives.

Delivery, returns and guarantee

Delivery: free to UK addresses, in 7 to 10 working days. Delivery details.

Returns: you have 30 days from delivery to send it back, unused. Returns and refunds.

Guarantee: 2 years, in addition to your statutory rights.

How to use

1. Draw a pencil grid across the face of your whetstone.

2. Wet both stones. If your whetstone needs soaking, soak it first.

3. Lay the whetstone flat, in its base or on a damp cloth, so it cannot slide.

4. Place the flattening stone on it, grooved face down. Rub back and forth and in small circles, with light, even pressure. Cover the whole surface, edges included.

5. Rinse and look at the grid. Where pencil remains, the stone is still low. Carry on until the grid has gone everywhere.

6. Rinse both stones and let them dry before you put them away.

Contact

A question before or after you order? Write to us and we will get back to you.

View full details

Why it matters

Flat stone, true edge

A whetstone wears hollow in the middle. On a hollow stone you cannot hold the same angle along the blade, so the edge comes out uneven.

Why a stone must be flat

The reason

Why a stone must be flat

Every stroke wears a whetstone a little, mostly in the middle. Over time it turns hollow. A hollow stone changes the angle as the blade moves along it. Flattening puts the surface back to level, so every part of the edge meets the stone the same way.

Made for one job

The details

Made for one job

  • Diagonal groovesThey carry the slurry away, so the surface does not clog.
  • Coarse 320 gritCoarser than most whetstones, so it wears down the high spots.
  • Full length180 mm long, like a standard whetstone, to cover the whole surface.

Questions

Before you buy

Another question? Write to us.

What is a flattening stone for?

It brings the surface of a whetstone back to flat. Whetstones wear unevenly with use, and a flat surface is what lets you hold a steady angle.

How do I know my whetstone needs flattening?

Draw a pencil grid on it and rub it with the flattening stone. If pencil remains in the middle, the stone was hollow there. A straight ruler laid across the stone shows it too.

How often should I use it?

It depends on how much you sharpen. For most home cooks, a check every few months is enough.

How do I use it?

Wet both stones. Rub the grooved face over the whetstone, back and forth and in small circles, until the pencil grid has gone everywhere. Then rinse both.

Which stones does it work with?

Water stones, such as the two in our Whetstone Set. At 180 mm it is as long as a standard whetstone.

What about delivery and returns?

Delivery is free in the UK and takes 7 to 10 working days. If you change your mind, you have 30 days to send it back unused, and it comes with a 2-year guarantee.

Free UK delivery
30-day returns
2-year guarantee
Secure payment